Warning: session_start() [function.session-start]: open(./tmp/sessions/sess_e8e035dc854b1e7dd3d9001e3b0afc43, O_RDWR) failed: Disk quota exceeded (122) in /home/tmhoh/public_html/kencotoyotalift.com/include/common.php on line 11
Kenco Toyotalift

CENTER-CONTROLLED RIDER PALLET JACK

PALLET JACK

  • 6,000 - 8,000 lbs. Lifting Capacity
  • Regenerative Braking
  • AC-Powered
  • Length to forkface 90.3 - 155.7 in
  • Height (Extended Handle) 56 in
  • Overall Width 32.5 in

The Toyota Center-Controlled Rider Pallet Jack is easy to maneuver and quick to respond to commands. The Center-Controlled Rider, ideal for longer runs, provides a comfortable operator compartment. Doubling as a ground-level order picker, the Center-Controlled Rider Pallet Jack is an asset to any warehouse or distribution center.



ERGONOMICS

  • Multifunction control handle with ergonomically angled hand grips
  • Dual thumb wheels with twist grips for directional control and travel speed
  • Fingertip control of lift, lower and horn functions
  • High-speed interlock
  • Dual hand brake levers
  • Adjustable height control handle (3-Positions)
  • Low-effort control handle
  • Bubble-cushioned operator floor mat, padded backrest and knee pad
  • Walk-through operator compartment
  • Low platform step height

PERFORMANCE

  • 6,000 & 8,000 lb capacity
  • Regenerative braking
  • On/off key switch
  • 24-Volt electrical system
  • Programmable performance parameters
  • Lift limit switch
  • 6? lift
  • Multiple hour meter indicator
  • Hydraulic overload protection valve
  • AC Drive System with thermal protection and current limiting
  • Battery discharge indicator with lift interrupt
  • Dual lift cylinder design
  • Fault code memory with hour meter reading
  • Fused control and power circuits

SERVICEABILITY

  • AC drive motor (no brushes or commutator)
  • Self-adjusting electric disc brake
  • One-piece, lightweight service access cover
  • Teflon« coated PolylubeTM lift linkage bushings (maintenance free)
  • Error indicator with self-diagnostics

SAFTEY

  • Wrap-around hand guard
  • Polyurethane torsion block stabilizing casters
  • Electronic horn

DURABILITY

  • Controller Area Network (CAN-bus) communications
  • Welded construction with reinforced heavy-duty bumper
  • Powder-coat paint finish
  • Box rail fork construction
  • Steel bulkhead wrappers
  • Forged rectangular steel tension rods
  • Heavy-duty bushings and pins
  • Solid trail fork castings
  • Tapered fork tips with pallet entry slides
  • Four-point lift linkage
  • High-strength polymer service cover
  • Fiberglass reinforced rubber drive tire
  • Polyurethane load wheels with steel hubs
  • Hall-effect switches
  • 48" load backrest extension

OPTIONS

  • Heavy Duty Load Wheels (Vulkollan) Resists internal heat build-up and can withstand the abuse of high-speed, long runs and heavy loads.
  • Dual Tandem Load Wheels (3.25" x 2") Option replaces the standard single polyurethane load wheels with "Double Boggie" style load wheels.
  • Storage Tray with Clip Board, Load Backrest Mounted An ABS plastic tray designed to carry pens, markers, tape, utility knife, paperwork and other various work materials.
  • Battery Compartment Rollers with Dual Side Gates Option provides rollers at the bottom of the battery compartment and dual side gates. Allows the battery to be rolled out from either right or left hand side of the truck.
  • Lubrication Package For Pivot Points (Grease Fittings) Option replaces the standard maintenance free Teflon« coated PolylubeTM bushings at the lift linkage pivot points with greaseable bushings (grease fittings).

SPECIFICATION CHART

Model Number Load Capacity* (lbs.) Max. Travel Speed Full Load (MPH) Max. Lift Speed Full Load (FPM) Max. Gradeability Full Load (%) Basic Right Angle Stack** (IN.)
8HBC30 6,000 6.2 N/A 10 98.8
8HBC40 8,000 6.2 N/A 10 142

* Based on 24" load center.
** Add load length and clearance.